3W RGB LED Driver AC85V-265V + Remote Control

Parameters for Driver:

• Input Voltage: AC 85V~265V 
• Output Voltage: DC3-5V
• Current: 320mA
• Function: Open circuit, Short circuit and Over loading   
• Application: compatible with 3 Watt RGB High Power LED.

Parameters for Remote Control:

• Turn on/off:  Turn on/off the LED light
• Control: Adjust the lamp colors and brightness
• More Functions: One remote control can be used for lots of lamps at the same time.
• Transition Effects: Flash, Strobe, Fade, Smooth
• Color Change: 16 Colors

Package:

• 1x AC 85V-265V Driver
• 1x Remote Control

 Connection:

Note:

The Driver is specially suitable for four pin common anode LED. You can easiy solder the LED to the four points in the center of the controller board as shown in the picture.

There are three Chinese Character on the board. 红/黑/白,

• 红=Red, means it connect to the red wire of the output of the driver.
• 黑=Black(GND), means it connect to the black wire of the output of the driver.
• 白=White, means it connect to the white wire of the output of the driver.